piston chamber

英 [ˈpɪstən ˈtʃeɪmbə(r)] 美 [ˈpɪstən ˈtʃeɪmbər]

网络  活塞腔



双语例句

  1. Heat is used to raise steam which either turns a turbine or forces a piston to move up and down in a cylinder. chamber, combustion, for turbojets or turbopropellers
    由热产生的水蒸气或者使涡轮旋转或者使活塞在气缸中上下运动。燃烧室,用于涡轮喷气发动机或涡轮螺旋桊发机
  2. It has a better reliability with the design improvement of signal tube site and structure, one way valve base, piston surface air chamber and tube connection cap.
    采用改进的信号管位置结构、单向阀座、活塞端面气室与接管封帽等后,更有力地提高了产品的可靠性。
  3. Piston structure is modified, so stress on piston throat gets lower and reliability of combustion chamber is improved.
    通过改进活塞相关结构,可达到降低活塞喉口应力,提高燃烧室可靠性的目的。
  4. It is mainly consisted of boby, bonnet, cushion container, piston chamber, disc, stem and other parts.
    主要由阀体、阀盖、缓冲容器、活塞室、阀瓣、阀杆等零件组件。
  5. A mechanical damper; the vibrating part is attached to a piston that moves in a liquid-filled chamber.
    一种机械阻尼器;震动部分连接着在液体小室中运动的活塞。
  6. Thin, circular, steel bands fit into grooves around the piston to seal the bottom of the combustion chamber.
    把薄的,圆形的,钢圈放进活塞周围的凹槽以密封燃烧室的底部。
  7. Based on ideal gas equation, the measurement method of diesel engine piston combustion chamber volume was researched.
    应用理想气体状态方程,对柴油机活塞燃烧室容积的检测方法进行了研究。
  8. The New Way of Improving Fatigue and Crack Resistance of Piston Combustion Chamber
    提高活塞燃烧室抗疲劳开裂性能的新途径
  9. Experimental Study on Optimization of Bowl-in-Piston Combustion Chamber for Spark Ignition Eng in es
    火花点火发动机碗型燃烧室的优化试验研究
  10. The numerical simulation investigates the effects of the parameters of the initial driving device and the parameters of the blank cartridge on the piston chamber pressure and piston velocity as well as receiver rotation speed.
    通过数值模拟,该文探讨了首发起动结构参数和火药弹参数对气室压力、活塞速度和机心匣角速度的影响。
  11. The crack and failure of aperture of larynx of piston combustion chamber can lead to the increasing trend with explosive pressure increasing, use FEA technology and engine durability test to research the crack effect of combustion chamber with the irregular shape structure of piston pinhole.
    针对活塞燃烧室喉口开裂失效随着爆发压力提高有所增加的趋势,利用FEA技术并结合发动机耐久试验进行了异形销孔结构对燃烧室开裂影响的研究。
  12. Compared with the traditional hydrostatic bearing structure, the area of slipper pair piston chamber is enlarged to ensure the formation of lubrication film while hydraulic motors starting, and a small diameter of damper is used to compensate the thermal viscidity effect.
    与传统的静压支承结构相比,增加了油室面积以保证液压马达启动时油膜的形成,采用合适直径的阻尼孔以补偿粘温效应。
  13. Through mounting a floating piston to pneumatic spring cylinder, one chamber structure was changed into two chambers structure, which can reduce leakage and improve service life of pneumatic spring.
    气弹簧缸体内加装了一个浮动活塞,将一室结构变成了两室结构,将密封气变成了密封油,大大减少了泄露,提高了气弹簧使用寿命。
  14. Analytical study of oil pressure in piston chamber of axial piston pump
    轴向柱塞泵柱塞腔中油液压力的分析研究
  15. The inner casing of one extraction back pressure steam turbine is a cylindrical structure, the dummy piston and the nozzle chamber combine into one entity, without central separating interface, the inner surface of said inner casing to be smooth, without steam seal gland.
    某台抽汽背压式汽轮机的内缸(平衡活塞与喷嘴室合为一体)为整体圆筒式结构,没有中分面,内缸内壁面为光面,没有汽封装置。
  16. Failure analysis and design of a piston with dumbbell-shaped chamber
    哑铃型燃烧室活塞失效分析与设计探讨
  17. Piston head is the key part within diesel engine combustion chamber; it is also closely related to the ship safety at voyage.
    活塞头是柴油机燃烧室内的主要部件,也与船舶的安全航行密切相关。
  18. The ω-combustion chamber with small caliber ratio, small surface-volume ratio and leading wall of secondary spray is not very well to make use of oxygen above piston surface and in the upper portion of combustion chamber.
    对带有二次喷射导向壁面的小口径比和小径深比的ω型燃烧室,充分利用活塞顶面以上氧气的问题仍有待解决。
  19. This paper analyzes effects of the following parameters, such as the piston compression ratio, combustion chamber, injection pump, supercharger, injection nozzle coupling, medium-cooled temperature on exhaust from the angle of test.
    从试验的角度分析了柴油机的活塞压缩比、燃烧室、喷油泵、增压器、喷油嘴偶件、中冷温度等参数对排放的影响;
  20. Simulation and Analysis of the Method of Reducing Thermal Crack at the Edge of Piston with Toroidal Combustion Chamber
    收口型燃烧室边缘热裂纹缓解措施的研究
  21. Design for Little Piston Rod of High-pressure Mixing Chamber
    高压混合头小活塞杆的设计
  22. The simulation result showed that making proper arc groove at the edge of the piston with the toroidal combustion chamber is effective and excellent.
    仿真计算结果表明在收口型燃烧室边缘开适当大小的圆弧槽对减少活塞热裂纹的产生是行之有效的。
  23. The medium is sealed with the sealing piston on which there are both a grease chamber and an air chamber. The product can be fully sealed by means of absolute sealing of the air in the air chamber.
    由密封活塞来密封介质,密封活塞上有油脂室和空气室,通过绝对密封空气室内的空气来达到绝对密封油品的目的。
  24. TESTING Experimental Study on Bowl in Piston Combustion Chamber for Spark Ignition Engine
    点燃式发动机碗形燃烧室的试验研究
  25. An Investigation of the Bowl in Piston Combustion Chamber for Spark Ignition Engines
    火花点火发动机碗形燃烧室的设计与研究
  26. An Experimental Research on Piston Durability in a Gasoline Engine with Jet-combustion Chamber
    射流燃烧室汽油机活塞耐久性的试验研究
  27. Analysis and Treatment of Tilting of Piston in Rarefied Oil Sealed Dry Gas Chamber
    稀油密封干式煤气柜活塞倾斜原因分析及处理
  28. Verify the function of test system, and study the cylinder heat transfer situation under different engine revolution speeds, draw the relationship of linear velocity of piston and heat exchange between gas and combustion chamber wall.
    验证了试验系统的功能,并研究了不同发动机转速下的缸内传热情况,得出活塞线速度与燃烧室燃气、壁面换热的关系。
  29. Cylinder head is one of the most complicated and important components in internal combustion engine. Cylinder head, the top of piston and liner enclose to form combustion chamber.
    气缸盖是柴油机中形状最为复杂的零件之一,它与活塞顶部及气缸内壁共同组成燃烧空间。

英英释义

noun

  1. a chamber within which piston moves

      Synonym:    cylinder